"Resisting Bending" Shape and Structure PPT Download

Description

"Resisting Bending" Shape and Structure PPT Download

Part One: Exploration Experiment

What is the relationship between the bending resistance of beams (1)

Precautions:

1. Use cardboard about 0.5 mm thick, and cut the paper into strips of about 25 cm long, 3 cm, 6 cm, and 12 cm wide.

2. In order for the paper strip to be used multiple times without being excessively bent, in the experiment, the height of the paper strip should be controlled at about 2 cm.

3. Keep experimental records.

What does the bending resistance of a beam have to do with (2)

Precautions:

Cut the 0.5 mm thick paper into strips about 25 cm long and 3 cm wide, then divide them into two and four pieces and stick them together and flatten them to make 1 sheet, 2 sheets, and 4 sheets of paper. And there are three paper beams of equal length and width. Keep good experimental records.

Conclusion: As the thickness of paper increases, the bending resistance will be greatly enhanced.

Resist bending PPT, part 2: expansion and extension

The bending resistance of a beam is proportional to the width of the beam, proportional to the square of the height of the beam, and inversely proportional to the length of the beam.

The Chinese proverb "the house does not collapse when the wall falls" fully expresses the characteristics of the beam-and-column structural system.

Resistance to Bending PPT, Part 3: Classroom Training

1. Fill in the blanks

1. In the experiment to study the bending resistance of paper, the experimental method used is ( ).

2. The house and beams are supported by ( ).

3. In the experiment on the width and bending resistance of paper beams, the changing conditions are ( ).

2. Choice

1. In the experiment on the thickness and bending resistance of paper beams, the changing conditions are ( )

A.Width of paper beam B.Thickness of paper beam

C. Height of paper beam D. Elevated length of paper beam

2. The cross beam is ( ) put in place

A.Put it horizontally B.Put it upright C.Put it flat D.Put it upright

Resistance to Bending PPT, Part 4: Homework

After class, continue to study in groups what factors are related to bending resistance?

Keywords: Free download of Chinese PPT courseware for the first volume of the sixth grade of the textbook version, download of resistance to bending PPT, download of shape and structure PPT, .PPT format;

For more information about the "Shape and Structure Resistance to Bending" PPT courseware, please click the Shape and Structure ppt Resistance to Bending ppt tab.

"Building a "Bridge" with Paper" Shape and Structure PPT Teaching Courseware:

"Build a Bridge from Paper" PPT Teaching Courseware on Shape and Structure Part One: Introduction to the New Lesson We have seen many bridges and walked on many bridges. In the last lesson, we also learned about the characteristics of several main types of bridges. Today, let us work together to build our own...

"Building a "Bridge" with Paper" Shape and Structure PPT Download:

"Build a Bridge with Paper" Shape and Structure PPT Download Part One Content: Hands-on practice to clarify the requirements for making a paper bridge: Within the specified time, use a piece of newspaper and a small amount of tape to build a bridge, which is required to span 35 cm wide Canyon, width greater than 10 cm..

"Building a "Bridge" with Paper" Shape and Structure PPT:

"Build a Bridge with Paper" Shape and Structure PPT Part 1: Bridge Building Standards Within the specified time, use a piece of newspaper and a small amount of tape to build a bridge. Requirements: The bridge can span a 35 cm wide canyon, the width is greater than 10 cm, and it can carry a vehicle weighing 200 grams...

File Info

Update Time: 2024-10-02

This template belongs to science courseware Science Edition for Sixth Grade Science Volume 1 industry PPT template

Preview