When making cabinets for home decoration, you can choose from three options: whole-house customization, on-site carpentry, and finished furniture.
And here I am Among the customers I have contacted in the past few years, almost 90% of them will choose to customize the cabinets for the whole house.
Why whole house customization , will it become the mainstream choice for people when decorating? I think it can be explained from the following aspects!
1 , with design drawings: what you see is what you get
Compared to woodworking, If the whole house is customized, the renderings of the cabinets will usually be shown first, so that you can visually see the general effect. What you see is what you get, and there is no need to open the box and draw a lottery.
▲Customized cabinet renderings: Customized furniture can See the approximate effect of the cabinet after it is finished.
Full house customization now The threshold is not high, and there are many small factories that can do it. If the small factories are serious about their work, the design, installation and after-sales service can be done very well and meticulously.
▲Customized cabinet After the 3D soft decoration is designed, you can also export the production drawing and list the number and size of the plates. The factory only needs to make the corresponding plates according to the production drawings. There is no need to cut the plates for on-site assembly. The plates produced by the machine must be More reliable than woodworking site saws.
Of course, there are some Small factories don’t even have designers (those that don’t produce pictures). Although they are very cheap, I suggest you don’t choose them easily. I have two customers who just wanted to be cheap and chose this kind of small factory customization that didn’t produce pictures. The result was the same. Overturned.
2 , The effect is stable: rollover will not be too outrageous
Compared to woodworking, There are various uncertainties in making cabinets on-site, but whole-house customization has a more stable and reliable effect. As long as you choose the right boards, even if the details are overturned, the effect will not be too bad, and it can generally achieve more than 80 points.
▲Whole House Customized boards are all cut and edge-sealed on the assembly line, making them more stable and reliable overall, with a lower failure rate.
However, woodworking is done on site If you encounter a half-skilled carpenter, there may be many places where the carpentry can overturn, such as rough edge sealing, huge gaps, chipped edges, etc. The finished cabinet will have an extremely rough effect, which will make you vomit blood.
▲Woodworking rollover case.
3 , Space utilization: don’t waste a centimeter
Compared to finished furniture , customized furniture can be made according to the on-site dimensions - the sides can be attached to the wall, and the top can support the ceiling. There is no need to waste a centimeter of space, and there will be no narrow gaps to hide dust and make it difficult to take care of.
As for finished furniture , the sides, rear and top are generally not placed against the wall, which leads to a lot of waste of space, and these gaps are easy to hide dust, and it will be troublesome if things fall in.
▲Customization is possible Completely attached to the wall, finished furniture generally has gaps.
So now for decoration, Few people would consider buying finished furniture. After all, everyone’s house is not large, and they all want to maximize the use of space through customized furniture.
4 , The general trend of the times: unstoppable
On the one hand, aesthetics Trends, the popular decoration styles now are all modern and minimalist styles. The design features of these styles are simplicity and practicality.
▲Modern extreme Jane is the current mainstream trend in decoration.
On the other hand There is a shortage of workers. Due to the "half-baked carpenters" fishing in troubled waters, the reputation of woodworking cabinets has deteriorated. At the same time, the older generation of skilled carpenters have retired, and it is now difficult to find carpenters who can make cabinets.
▲Old woodworking Retired, and there are relatively few reliable young carpenters.
As a property owner, in When faced with the choice between "customization with stable effects" and "hope to meet a good carpenter", I believe they will choose customization, right? Over time, there has been a trend of decreasing market demand and supply.
After reading the above 4 With some analysis, I believe you all know why whole-house customization has become mainstream, right? If you still don't understand, let me make a simple summary - traditional carpentry makes cabinets, and the design and installation are all done by one carpenter. However, whole-house customization is divided into assembly lines of design, production and installation. Division of labor and cooperation are not only The yield is high and the controllability is strong.
Articles are uploaded by users and are for non-commercial browsing only. Posted by: Lomu, please indicate the source: https://www.daogebangong.com/en/articles/detail/wei-shen-me-quan-wu-ding-zhi-cheng-le-zhu-liu.html
支付宝扫一扫 
评论列表（196条）
测试