just for fun:Make a one-time small kite skillfully-Font Tutorial免费ppt模版下载-道格办公

In these dog days of summer, Yueyue didn't know which cartoon she had watched, and she insisted on flying a kite, but she refused to listen to any advice. Your grandparents are coaxing you, saying they will take you there early tomorrow morning, but where can you buy a kite nearby in the summer? Yueyue sees that her mother has done a lot of DIY recently, and she feels that I can do anything. Come and pester me, begging me to make one for her. I used baking paper from the kitchen, wooden skewers for barbecues, and leftover ribbon paper from Chinese New Year decorations to make a small disposable kite for her. I'm afraid it won't be strong enough, so I put it up after personally testing that it wouldn't fall apart.

Prepare materials:

- Kite string

- Silicone paper for cooking

-Cotton thread

- key ring

- Colorful soft paper

- 1 short wooden stick, one slightly longer wooden stick and two long wooden sticks of the same length (the length of the short wooden stick should be as wide as the silicone paper)

- Small white square paper (cut from A4 paper will do)

- Scissors

- ruler

- Latex

- pencil

- Glue stick

- Q-tips and toothpicks

- bottle caps

Specific steps:

1. Pour the latex onto the bottle cap first. Because the silicone paper is very thin, it will break if you apply too much latex, so you need to dip it with a cotton swab when applying.

2. Pull out some silicone paper, do not cut it yet. Then put a short wooden stick on the top, then fold it up with paper and glue it in place.

3. Then take out the slightly longer wooden stick, take the short wooden stick, place it vertically and fix it with latex, and then cut the silicone paper along the length of the long wooden stick.

4. Place two long wooden sticks diagonally and trim them if they are too long. If they are short, cut the middle one shorter. Glue after determining the position.

5. Fix the wooden stick again with white square paper.

6. Decorate the back with ribbon paper.

7. Then prick two holes on the left and right at the intersection of the central wooden sticks.

8. Wrap three pieces of cotton thread around the three points drawn on the picture, then tie them together and tie them to the keychain. Note that it must be tied to the side without the stick.