:[Practical Tutorial] PPT Scientific Drawing Tutorial (003) - Schematic Diagram of Scratch Coating Preparation Process-PPT tutorial免费ppt模版下载-道格办公
投稿
  1. JustNewsHome
  2. PPT tutorial
  3. [Practical Tutorial] PPT Scientific Drawing Tutorial (003) - Schematic Diagram of Scratch Coating Preparation Process

[Practical Tutorial] PPT Scientific Drawing Tutorial (003) - Schematic Diagram of Scratch Coating Preparation Process

Author: daogeziyuan • • PPT tutorial • Views 1129

Do you need my help? Let me know if you have any questions that I can help with.

Hello, everyone! Welcome everyone to pay attention to PPT scientific research drawing. Today, I will continue to update the PPT scientific research drawing tutorial for you in this short section. I hope you will support me a lot!
In this tutorial, we use PPT to draw a schematic diagram of the scraping coating preparation process. The reference picture is from Joule (Joule.2020, aavailableonline ).
Let’s start the third PPT scientific research drawing practical tutorial:
< /span> Step 1
Draw the substrate. Insert 1 rectangle, set size: height 5 cm, width 7 cm;
Format shape:
fill-gradient fill, type-linear, direction -Linear to the right, see the figure below for detailed parameters;
line-no line;
< section>Three-dimensional rotation: X rotation -323.2°, Y rotation -310°, Z rotation -60°.
Step 2
Draws a coating. Insert 1 rectangle, set size: height 4.5cm, width 6cm;
Set shape format:
fill-gradient fill, type-linear, direction-linear direction Right, see the figure below for detailed parameters;
lines-no lines;
three-dimensional rotation : X rotation -323.2°, Y rotation -310°, Z rotation -60°.
Step 3
Drawing Bladecoater. Insert 1 rectangle, set size: height 0.8 cm, width 0.8 cm; insert 1 Trapezoid, setsize: height 0.8 cm, width 0.8 cm, and then adjust the length of the base appropriately; select rectangle and trapezoid to combine Boolean operations, Form a new shape;
Format the shape:
Fill-solid-color-fill-brown;
lines-no lines;
3D format: depth-automatic, material-metal effect, light source-rough, see the figure below for specific parameters;
< section>Three-dimensional rotation:X rotation -320°, Y rotation -28°, Z rotation -0°.
Step 4
Draw N2Knife. Insert 1 rectangle, set size: height 0.8 cm, width 0.8 cm; insert 1 Trapezoid, set the size of : height 0.8 cm, width 0.8 cm, then adjust the length of the bottom edge appropriately; select Rectangle and Trapezoid Combine Boolean operations and rotate 20°;
Set shape format:
Fill-solid color fill-brown;
Lines-No Lines;
3D Format: Depth-Auto, Material-Metallic Effect, Light Source-Rough, see the figure below for specific parameters;
3D rotation: X rotation -308°, Y rotation -20°, Z rotation -6.1°.
Step 5
DrawFixedAxis< span>. Insert 1 ellipsecircle, set< /span>Size: height 0.4 cm, width 0.4 cm;
Set shape format:< /span>
fill-solid color fill-brown;
line< span>-No Lines;
3D Format: Depth-Auto, Material-Metallic Effect, Light source-rough, see the figure below for specific parameters;
3D rotation:X Rotate -320°, Y rotate -28°, Z rotate -0°;
After that, copy the ellipse and adjust it to a suitable position.
Step 6
Draw Arrows at both ends< span>. Insert 1 arrow: right, setsize: height 0.8 cm, width 0.8 cm;
Set shape format:
Fill-solid color fill-light blue;
lines- No lines;
3D format: depth-automatic, material-matte effect, light source-balance , see the figure below for specific parameters;
Three-dimensional rotation:X rotation -40.4°, Y rotation -310.4° , Z rotation -299.9°;
After copying the arrow and flipping it horizontally.
Step 7
Draw Bottom Arrow. Insert 1 arrow: down, setsize: height 2 cm, width 1 cm;
Set shape format:
Fill-solid color fill-sky blue;
lines-< span>No lines;
3D rotation:X rotation -47.3°, Y Rotate -322°, Z rotate -300.1°;
After that, copy 2 arrows and adjust them to a suitable position.
Step 8
Combine the above components and adjust the position appropriately, and finally add lines and text< span>, that is, the drawing of the schematic diagram of the scraping coating preparation process is completed.
This is the end of today's sharing, thank you for watching!

let me know you're watching

Articles are uploaded by users and are for non-commercial browsing only. Posted by: Lomu, please indicate the source: https://www.daogebangong.com/en/articles/detail/Practical%20Tutorial%20PPT%20Scientific%20Drawing%20Tutorial%20003%20%20Schematic%20Diagram%20of%20Scratch%20Coating%20Preparation%20Process.html

Like (810)
Reward 支付宝扫一扫 支付宝扫一扫
Lomu ★ Columnist
48 196
single-end

Related Suggestion