It has been quiet for a while, and today it will be Go to the hospital to get busy! So I finished the article and video yesterday.
Woke up early today, I have to go to the hospital after sending out. Let's look at the problem:
The effect of this letter-stacked poster is actually the same as Ye Lang’s previous article on the arrangement of cartoon sketch text, and the whole can be done only by using the blending mode. It belongs to the low-end version:
Click the link to read the original text
If you have already made children's shoes for sketching cartoon text posters, it will be quite simple to do this one again. If you think sketching cartoons is too troublesome, you can try to do this one first.
Come on, let's make this letter stacking effect poster today.
First of all, open Ai and create a new drawing board with any size:
Also make a reference line first, use the rectangle tool to draw a rectangle with the same size as the sketchpad, fill it with the color you want, and press Ctrl+2 to lock it as the background:
Draw another square, the color is random, the size can be figured out:
Execution effect-3D-bulge and bevel, the thickness of the bulge can be seen from everyone, as long as it looks almost a cube. Then the position can be as long as it is equiangular:
Change the surface to wireframe again:
For the convenience of observation, you can change the color of the stroke after expansion, and make it bolder appropriately:
Then drag to copy one out, and Ctrl+2 locks:
Input text, after Ctrl+Shift+O outline, ungroup first:
Select all the text again, execute Effect-3D-Protrusion and Bevel, first change the position to Isometric-Above, and change the thickness to 0:
Then compare the position of the text with the reference line, and you can also adjust the angle of text rotation:
After placing part of the text, the rest can be selected all at once, and change the position to isometric-right in the 3D properties:
After finishing the layout, it will look like this, let’s give it a unified stroke color:
Then mix it again. It is recommended to set the number of steps not to be high. If it is high, it will not look good:
Some places that need to adjust the number of steps can be adjusted in time:
It will probably look like this after finishing, there is really nothing to say here, just pay attention to adjusting the layer order of different letters:
In addition, if you want to modify the color, you can select all the objects and click to recolor the artwork:
Then go to modify the color in the red box:
Finally, let’s see the effect of codeword, typesetting, and sample guide:
After getting familiar with it, it only takes 10 minutes to make this kind of poster!
Also recorded a low-quality video version, welcome to watch:
Okay, that's all for today's sharing. Those who want to practice reply "188" or "text stacking" Get the source file now!
This article was published by "Wild Deer"
Please contact the author "Red Deer Yelang" before reprinting
Private transfer must be investigated
I started a group of design enthusiasts
Welcome fellow enthusiasts to join the group to communicate and discuss
In order to ensure the quality of the group
I turned off the QR code scanning function
Partners who want to join the group can add me on WeChat: maluyelang666
I pull you
☟Click "Read the original text" below to view more AI content
Articles are uploaded by users and are for non-commercial browsing only. Posted by: Lomu, please indicate the source: https://www.daogebangong.com/en/articles/detail/GraphicsVideo%20Ai%20Wild%20TutorialTen%20minutes%20to%20make%20a%20poster%20with%20text%20stacking%20effect.html
支付宝扫一扫 
评论列表（196条）
测试