The stars move, time flies. It has been more than four years since I set foot on the job without knowing it. These four years have been busy and fulfilling. Through these four years of study, I have a deeper understanding of cost work. Looking back on the work from 20xx to 20xx, it is summarized as follows:
As a budgeter, he should have the ability to recognize and read pictures, and have certain professional knowledge. The so-called professional knowledge is not limited to familiarity with quotas, but should include familiarity with construction specifications, standard atlases, and construction techniques. For example, the hook, lap and anchor length of the steel bar. According to the specification requirements, different parts, different concrete grades, and different environments have different lap joint and anchorage lengths. This has a great influence on the calculation of steel bars. The steel bars of a frame project only account for about 5%-10% of the total steel bars for hooks, lap joints and anchors. Therefore, it is very important for a cost engineer to master the construction specifications and standard atlas. Here is a summary of the steps involved in making a budget:
After receiving a complete drawing, instead of rushing to calculate, you should check whether the number of sheets is consistent with the drawing catalog, read the drawing carefully, and understand the project Structure, understand design intent. Have a detailed understanding of the project, form the basic three-dimensional structure of the project, and make drawings and records.
Collect the specifications and standard atlases required for drawings, and master their work content. Study the construction organization design of the project to understand construction deployment, construction flow, and personnel.
Select the required quota and supporting fee collection documents and related notices and adjustment materials, and carry out inspections for unspecified cost information or special materials and equipment Market inquiry.
The calculation of the engineering quantity must be calculated according to the calculation rules of the selected project quota, so you must master the calculation rules of the quota before calculation. The calculation order of engineering quantities is calculated according to the construction sequence method, first underground and then above ground, first indoor and then outdoor, first structure, and then decoration. Some are calculated according to the order of quota items, and some are calculated according to the order of drawings, etc. It depends on your own habits. I like to calculate according to the order of construction, so that the thinking is clear, the process is clear, and the process is familiar.
Apply the sub-item of the quota. When applying it, pay attention to whether the work content is consistent with the construction drawings, specifications and standard atlas. If it is inconsistent, the relevant quota should be adjusted content. In particular, the application of scaffolding must understand the essence of the quota.
The fixed fee is determined according to the category of the project and the area where the construction site is located. Therefore, it is necessary to determine whether the project is a Class I, Class II, or Class III project, whether it is an industrial building or a civil building, and whether the construction site is in a city, a town, or other areas. This will allow for an accurate determination of the rate.
The price adjustment of materials must be based on the cost information of engineering materials released by the cost management agency of the city where the construction is located.
Instructions for preparation, generally including the basis for preparation, the quota used for preparation and the number of charges and cost information. The budgeting software used, etc.
Bind into a volume, affixed with the professional qualification seal of relevant personnel, and signed.
A complete budget is completed through the above steps. This is a little bit of my work experience.
By summing up the work in the past four years, I found that I still have many shortcomings, which need to be overcome in future work, and more needs to be done at the same time. Read books, earnestly study the use of quotas and related documents, master professional knowledge, improve your ability to work, strengthen your sense of responsibility, and do your personal work in a timely manner.
In short, in the future work, I will continue to summarize and reflect, constantly spur myself and enrich energy, improve my own quality and business level, In order to adapt to the times and the development of the enterprise, we will make progress and grow together with the company.
Work summaryRecommended ppt template:
Simple business wind car industry work summary general ppt template
Business style design department year-end work summary report ppt template
business simple Internet brand work summary report ppt template
Simple party and government work summary report general ppt template
Simple business style mobile phone enterprise work summary ppt template
Creative geometric style personal mid-year work summary report ppt template
Small and fresh style mid-year work summary general ppt template
Simple and vigorous personnel department year-end work summary ppt template
Articles are uploaded by users and are for non-commercial browsing only. Posted by: Lomu, please indicate the source: https://www.daogebangong.com/en/articles/detail/Budget%20clerk%20work%20summary%20ppt%20sample.html
支付宝扫一扫 
评论列表（196条）
测试